Grizzly G0560 - Manual (Page 11)

G0560 Meat-Cutting Bandsaw -9-
This machine left our warehouse in a carefully
packed crate or box. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of the shipment, you should inventory the
equipment.
Wear safety glasses dur-
ing the entire set up
process!
This machine presents
serious injury hazards
to untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations BEFORE
starting the machine!
Inventory
The Model G0560 is a
heavy machine (127 lbs.
shipping weight). DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.
After all the parts have been removed from the
carton, you should have:
Base Unit (Figure 3)
A. Model G0560 Bandsaw Base Unit..............1
Figure 3. Bandsaw base unit.
Unpacking
SECTION 5: SET UP
B. Stand Hardware Bag
—Knob Screw M6-1 x 12..........................17
—Special Hex Bolt M10-1.5 x 16................3
—Hex Bolt M8-1.25 x 20 ............................4
—Carriage Bolt M8-1.25 x 16 ..................22
—Hex Nut M8-1.25 ..................................30
—Flat Washer 8mm ..................................34
—Hex Bolt M6-1 x 20..................................4
—Hex Bolt M6-1 x 12..................................4
—Flat Washer 6mm ....................................8
—Tap Screw #6 x
3 ⁄
8
" ................................12
—Catch Tab ..............................................12