Grizzly w1702 - Manual (Page 50)

Shaper Accessories
The Woodstock Rub Collars deliver extremely smooth, bump-free
shaping cuts. All Woodstock rub collars are manufactured from solid
steel on CNC lathes. We assemble these in the USA using high-quality,
maintenance free bearings. Contact your local Woodstock
International Dealer for kits or specific single sizes.
The SHOP FOX ® Router Bit Spindle takes advantage of your existing
selection of router bits, so you can use many router bits with your
shaper. The router bit spindle accepts 1/4" and 1/2" shank bits.
The Roman Carbide ® Shaper Cutters and Router Bits use extra thick
Micro-Grain C2 carbide for extra sharpness and shock resistance, and
a special anti-friction coating to reduce shaper power loss and cutter
gumming. The European "controlled cut" profiles on select bits reduce
the danger of kickback, and Shear angle profiles minimize wood
tearing and reduce or eliminate sanding. View the
Hottest Line In
America at http://www.romancarbide.com
The D1700 Woodstock Moulding Head and available knives let you
cut many profiles for your projects. This system uses a wide variety
of precision-ground cutter patterns for use in a specially-designed
CNC-machined, aircraft aluminum cutterhead. The 2" moulding head
accepts all 2" knives and works on shapers with 3/4" diameter spindles
and motors 1-1/2 HP or larger. The 2" moulding head requires a 3" tall
spindle.
The Woodstock Straight Bushings and T-bushings allow you to take
advantage of your existing selection of shaper cutter bits that
do not fit a current shaper spindle. These straight bushings and
T-bushings allow for special cutting dimension adjustment on a
variety of spindle and shaper cutter sizes. Go to
http://www.shopfox.biz/index.cfm
PARTS
-48-