Grizzly H3123 - Manual (Page 15)

H3123 Electric Guitar Kit -13-
3. Secure the wires with masking tape so they
do not fall back out through the holes
.
4. Align the pick guard on the guitar body as
shown in
Figure 17 . Pay special attention to
the neck cutout alignment on the body.
5. Secure the position of the pick guard to the
body with masking tape.
6. DO NOT drill the screws at this time! Final
adjustments need to be made after installing
and winding the strings.
Figure 17. Pick guard alignment.
Tremolo Bridge
To attach the tremolo bridge to the guitar
body:
1. Place the tremolo bridge in the cut-out shown
in
Figure 18 .
2. The tremolo bridge is correctly positioned
when the distance between the center of the
12th fret and the front edge of the tremolo
bridge are precisely 12
7 ⁄
16
" apart ( Figure 19 ).
Figure 18. Tremolo bridge placement.
Figure 19. Correct distance between the 12th
fret and the tremolo bridge.
12 7 ⁄
16
"
12th Fret