Grizzly G0710 - Manual (Page 16)

-14-
Model g0710/g0710p (Mfg. since 11/11)
figure 7. Minimum working clearances.
site considerations
Wall
Wall
Floor
23"
Minimum
Front View
Wall
Power
Floor
Wall
Keep
Area
Clear
Side View
Minimum
Motor
Cooling
Air Gap
3"
45"
Minimum
Weight load
refer to the machine data sheet for the weight
of your machine. Make sure that the surface
upon which the machine is placed will bear the
weight of the machine and the dust collection bag
when full. additionally, consider the weight of any
dynamic loading that may occur when operating
the machine.
space allocation
provide enough space around the machine for
adequate motor ventilation and the removal/
installation of the collection bag.
see below for
required space allocation.
lighting
lighting around the machine must be adequate
enough that operations can be performed safely.
shadows, glare, or strobe effects that may distract
or impede the operator must be eliminated.
physical environment
the physical environment where the machine is
operated is important for safe operation and lon-
gevity of machine components. For best results,
operate this machine in a dry environment that is
free from excessive moisture, hazardous chemi-
cals, airborne abrasives, or extreme conditions.
extreme conditions for this type of machinery are
generally those where the ambient temperature
range exceeds 41°–104°F; the relative humidity
range exceeds 20–95% (non-condensing); or the
environment is subject to vibration, shocks, or
bumps.
electrical installation
place this machine near an existing power source.
Make sure all power cords are protected from
traffic, material handling, moisture, chemicals,
or other hazards. Make sure to leave access to
a means of disconnecting the power source or
engaging a lockout/tagout device, if required.
children or untrained people
may be seriously injured by
this machine. only install in an
access restricted location.