Graco Inc. 222300 - Manual (Page 38)

38 307912
Accessories
Use Only Genuine Graco Parts and Accessories
MISCELLANEOUS ACCESSORIES
Snap Ring Pliers 110090
For removing the ES ON-OFF Valve Retaining Ring
(item 47 in Parts List).
Paint Resistance Meter 722886
Used with 722860 Paint Probe to measure resistance
of paint. Not for use in Hazardous areas.
Paint Probe 722860
Used with 722886 Paint Resistance Meter to measure
resistance of paint. Not for use in Hazardous areas.
Grounding Clamp And Wire 222011
12 ga, 25 ft (7.6 m) wire
Safety Warning Signs
FM Approved; Available at no charge from Graco.
Must be ordered separately.
180060 Warning Sign (English)
Megohmmeter 241079
500 Volt output; 0.01–2000 megohms.
Not for use in Hazardous areas.
TI0377
ES ON/OFF Valve Conversion Kit 223976
Converts the ES ON/OFF Valve to a constant on
setting. A ball valve is included for complete air shut-
off at the gun.
Push-Pull Pattern Adjustment Valve 224883
Pattern adjustment valve that allows quick adjustment
of the pattern width between two adjustable settings.
Four-finger Trigger Conversion Kit 223054
FM Approved; For converting from two-finger trigger to
four-finger trigger.
Converting To A Waterborne System
FM Approved; Contact your Graco representative for
information on converting Model PRO 3500sc spray
gun to Model PRO 3500WB waterborne spray gun, for
use in a waterborne system. Refer to Instruction
Manual 308584.
High Conductivity Gun Conversion Kit 223451
For converting PRO 3500sc gun to PRO 3500hc gun.
REFERENCE ONLY
Not Included
High Conductivity Hose Kit 223780
Installation of this kit enables the PRO 3500sc gun to
apply fluids with a resistivity range of 2.0 megohm cm
to infinity.