Genie 106730 - Manual (Page 2)

Welder Supplement Part No. 106730
April 2006
Technical Publications
Genie Industries has endeavored to deliver the highest
degree of accuracy possible. However, continuous
improvement of our products is a Genie policy.
Therefore, product specifications are subject to change
without notice.
Readers are encouraged to notify Genie of errors and
send in suggestions for improvement. All
communications will be carefully considered for future
printings of this and all other manuals.
Contact Us:
http://www.genieindustries.com
e-mail: [email protected]
Copyright © 2004 by Genie Industries
106730 Rev A July 2004
First Edition, First Printing
"Genie", "Z" and "S" are registered trademarks of
Genie Industries in the USA and many other
countries.
Printed on recycled paper
Printed in U.S.A.