Grizzly G8622 - Manual (Page 9)

G8622 Tilting Spindle Sliding Table Shaper -7-
SECTION 3: GENERAL INFORMATION
Grizzly Industrial, Inc. is proud to offer the Model
G8622 Shaper. This shaper is part of Grizzly’s
growing family of fine woodworking and metal-
working machinery. When used according to the
guidelines stated in this manual, you can expect
years of trouble-free, enjoyable operation.
The Model G8622 Sliding Table Tilting Spindle
Shaper is intended for heavy-duty professional
use; it features a 5 H.P. single-phase motor,
220V operation with magnetic power switching
and full reversing capabilities. The Model G8622
also features a precision-ground cast iron table,
hold-down springs, three interchangeable tilting
spindles, and a sliding table w/clamping miter
gauge. This shaper is capable of operating at
four spindle speeds: 3600, 5100, 8000 and
10,000 R.P.M., giving you a versatile shaper with
plenty of power.
A number of optional accessories for the Model
G8622 are available. Please refer to the current
Grizzly catalog for more information.
We are also pleased to provide this manual with
the Model G8622. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our latest effort to produce the best docu-
mentation possible. If you have any criticisms
that you feel we should address in our next print-
ing, please write to us at the address below:
Grizzly Industrial, Inc.
C ⁄
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227
Commentary Most important, we stand behind our machines.
We have an excellent service department at your
disposal should the need arise. If you have any
service questions or parts requests, please call or
write to us at the location listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone:(570) 546-9663
Fax:(800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Address after fall 2001:
Grizzly Industrial, Inc.
1203 Lycoming Circle
Pennsdale, PA 17756
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G8622 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep
it for reference.
Read the manual before
assembly and operation.
Become familiar with
the machine and its
operation before begin-
ning any work. Serious
personal injury may
result if safety or opera-
tional information is not
understood or followed.