Gateway GCM-4 - Manual (Page 93)

85
To update your jukebox firmware:
1 Turn on your jukebox and connect it to your computer using the
USB combo cable.
2 Go to support.gateway.com , then find the support page for the
MP3 Photo Jukebox GCM-4.
3 Follow the support page’s instructions for downloading the most
recent firmware and saving it to your computer. Take note of where
the firmware update file is saved to.
4 On the Windows taskbar, right-click Start , then click Explore .
Windows Explorer opens.
5 Open the folder you saved the firmware update to, then double-click
the firmware update file. The jukebox firmware utility opens.
6 Click Update . The program updates your jukebox firmware.
7 After the update is finished, disconnect the jukebox from the
computer.
If you experience difficulty updating your jukebox firmware, see the
troubleshooting steps for “Firmware update fails” on page 76.