Using the self-cleaning oven – GE 49-8830-1A User Manual

Page 17

Advertising
background image

17

Tr

oubleshooting T

ips

Car
e and Cleaning

Installation Instr

uctions

Operating Instr

uctions

Safety Instr

uctions

Using the self-cleaning oven.

(on self-clean models only)

Never force the latch handle. Forcing the handle will damage the door lock mechanism.

Before a Clean Cycle

The range must be completely cool in order to set
the self-clean cycle.

We recommend venting with an open

window or using a ventilation fan or hood

during the first self-clean cycle.
Remove all cookware and any aluminum

foil from the oven.
The oven shelves can be self-cleaned, but

they will darken, lose their luster and

become hard to slide.

Do not use abrasives or oven cleaners. Clean

the top, sides and outside of the oven door

with soap and water.
The enamel grid and broiler pan may be

cleaned in the self-cleaning oven. However,

to help prevent heavy smoke caused by self-

cleaning the greasy soil in the pan, you must

first clean off the excess grease.
Make sure the oven light bulb cover is in

place and the oven light is off.

Wipe up heavy soil on the oven bottom.

How to Set the Oven for Cleaning

Latch the door.
Turn the Oven Temperature knob to
CLEAN.

Clean cycle time is normally 4 hours and 20

minutes. You can change the clean time to

between 3 hours and 5 hours, 59 minutes by

using the HOUR and MIN. pads.

When the CLEAN light flashes, slide the

latch handle to the left, and turn the Oven

Temperature knob to OFF.

To stop a clean cycle,

turn the Oven

Temperature knob to OFF. Wait until the

oven has cooled and unlatch the door.

How to Delay the Start of Cleaning

Latch the door.
Turn the Oven Temperature knob

to CLEAN.
Press the START TIME ON/OFF pad.
Press the HOUR and MIN. pads to set

the time cleaning will start.

When the CLEAN light flashes, slide the

latch handle to the left as far as it will go and

turn the Oven Temperature knob to OFF.

After a Clean Cycle:

You may notice some white ash in the oven.

Wipe it up with a damp cloth after the oven

cools.
If white spots remain, remove them with a soap-
filled steel wool pad and rinse thoroughly with a
vinegar and water mixture.

These deposits are usually a salt residue that

cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,

repeat the cycle.

You cannot set the oven for cooking until

the oven is cool enough for the door to be

unlatched.

While the oven is self-cleaning, you can

press the CLOCK pad to display the time

of day. To return to the clean countdown,

press the COOK TIME ON/OFF pad.

If the shelves become hard to slide, wipe

the shelf supports with cooking oil.

Advertising
This manual is related to the following products: