GE 49-8830-1A - Manual (Page 14)

Using the clock and timer.
(on self-clean models only)
Not all features are on all models.
Operating Instr
uctions
Safety Instr
uctions
Car
e and Cleaning
Installation Instr
uctions
Tr
oubleshooting T
ips
14
To Set the Clock
The clock must be set for the automatic
oven timing functions to work properly.
The time of day cannot be changed during
a timed baking or self-cleaning cycle.
Press the CLOCK pad.
Press the HOUR and MIN. pads.
Make sure the clock is set to the
correct time of day.
To Set the Timer
Press the TIMER ON/OFF pad. Press the HOUR and MIN. pads until the
amount of time you want shows in the
display. The timer will start
automatically within a few seconds of
releasing the pad.
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 11 hours and 59
minutes.
End of Cycle Tones
Clear the tones by pressing the pad of the
function you are using.
or
To Reset the Timer
If the display is still showing the time
remaining, you may change it by pressing
the HOUR and MIN. pads until the time you
want appears in the display.
If the remaining time is not in the display,
recall the remaining time by pressing the
TIMER ON/OFF
pad and then pressing the
HOUR and MIN. pads until the new time you
want shows in the display.
To Cancel the Timer
Press the TIMER ON/OFF pad once. To
cancel the timer press the TIMER ON/OFF
pad again.