GE 16223870 - Manual (Page 37)

37
D
IALING A
CID N
UMBER
While reviewing Caller ID records, you may dial the phone number
showing in the display.
1. Make sure the phone is OFF (not in talk mode).
2. Press cid/vol ( or ) button on the until the desired CID record is
displayed. Depending on (a) how the incoming phone number was
formatted when it was received, and (b) whether or not you previously
pre-programmed your local area code into memory, you may need to
adjust the format of the incoming caller ’s stored phone number before
dialing it back. The format button lets you change the format of the
displayed number.
Available formats include:
Number of digits Explanation Example
Eleven digits long distance code “1 ” 1-317-888-8888
+3- digit area code +7-digit
telephone number.
Ten digits 3-digit area code +7-digit 317-888-8888
telephone number.
Seven digits 7-digit telephone number. 888-8888
NOTE: If the incoming number is a Direct Dial Number, it is supplied by your
local phone company, and you may not adjust its format. When you press the
format/conference button on handset PRESS TALK KEY displays. Press the
talk/callback button on handset to dial the number.
3. If the number does not dial as shown, press the format/conference
button on handset. Repeat if necessary, until the correct number of
digits show in the display.