Grizzly G9985 - Manual (Page 15)

G9984/G9985 Oscillating Belt Edge Sander -13-
Attaching the base supports to the main base:
1. Slide the base supports under the main
machine base.
2. Using (4) M10-1.5 x 30 hex bolts, (4) 10mm
flat washers, and (4) 10mm lock washers,
secure the main machine base to the base
supports as shown in
Figure 7 . Be sure the
lock washer is between the hex bolt head and
the flat washer when installing.
Base Supports
Figure 7. Attaching base supports to main base.
Bolt Here