Gateway WBU-110 - Manual (Page 24)

20
Chapter 2: Windows 98SE, Windows Me, and Windows 2000
www.gateway.com
Step 1: Installing the hardware and
software
Installing the Gateway Wireless Monitor
Use the following instructions to install the Gateway Wireless
Monitor program.
To install the Gateway Wireless Monitor:
1 Insert the CD that came with your PC Card into your
computer’s CD or DVD drive. If the program starts
automatically, go to Step 5.
- OR -
If the program does not start automatically, go to
Step 2.
2 Click Start , then click Run . The Run dialog box opens.
3 In the Open text box, type d:\app\setup.exe (where d
is the drive letter of your CD or DVD drive).
4 Click OK . The Gateway Wireless Monitor wizard starts.
8509438.book Page 20 Tuesday, August 12, 2003 1:23 PM