Gateway WBU-110 - Manual (Page 40)

36
Chapter 2: Windows 98SE, Windows Me, and Windows 2000
www.gateway.com
Where to go from here
Creating your wireless Ethernet network
Now that you have configured your wireless Ethernet network,
you are ready to create a wireless network. Go to the creating a
wireless access point network or creating a peer-to-peer wireless
network section in the Setting Up Your Wireless Windows
Network guide included on the installation CD that came with
your network device.
Using your wireless Ethernet network
After you create and configure your wireless Ethernet network
and you know how to turn your wireless emitter on and off,
you are ready to use the network. Go to the sharing your
resources section in the Setting Up Your Wireless Windows
Network guide included on the installation CD that came with
your network device.
Troubleshooting your wireless Ethernet
network
If you cannot get your wireless Ethernet network to work, go to
the troubleshooting section in the Setting Up Your Wireless
Windows Network guide included on the installation CD that
came with your network device.
8509438.book Page 36 Tuesday, August 12, 2003 1:23 PM