Assembly – Grizzly G0474 User Manual
Page 10
-8-
G0474/G0475 Sandblasters
Assembly
Figure 1. Wheel and handle installation.
Figure 2. Sand outlet control installation.
Ball Valve
To assemble the sandblaster:
1. Install the wheels, handles, and leg to the tank
with the screws, washers, nuts, and cotter
pins as shown in
Figure 1.
Figure 4. Sand blaster hose installation.
Figure 3. Sand blaster handle and nozzle
assembly.
2. Seal all pipe threads with Teflon tape, and
assemble and install one of the four ball
valves to the bottom of the tank with two
3
⁄
8
"
nipples, and the sand outlet elbow as shown
in
Figure 2.
3. Assemble one of the remaining three ball
valves with a
3
⁄
8
" hose nipple, and the nozzle
arbor as shown in
Figure 3.
4. Install one of four sand blasting nozzles into
the nozzle arbor as shown in
Figure 3.
5. With the two hose clamps, secure the
sandblaster hose to the sand outlet elbow and
the sand blaster nozzle assembly as shown in
Figure 4.
3
⁄
8
"
Nipple
3
⁄
8
"
Nipple
Sand
Outlet
Elbow
Tank
Nozzles
Nozzle
Arbor
3
⁄
8
"
Hose Nipple
Ball Valve
Hose Clamp
Sand Blaster Nozzle Assembly
Hose
Outlet Elbow