Additional safety instructions for sandblasters – Grizzly G0474 User Manual

Page 8

Advertising
background image

-6-

G0474/G0475 Sandblasters

Additional Safety Instructions for

Sandblasters

8. MAINTAINING EQUIPMENT. Check air

lines and fittings for any leaks, and replace
lines and reseal fittings immediately.

9. SAFE SAND BLASTING. Do not use sys-

tem over the rated PSI.

10. CORRECT LIGHTING. Always make sure

that you have adequate lighting when sand-
blasting.

11. LOADING & UNLOADING. Close the air

supply ball valve and discharge the air tank
before disconnecting the air supply line.

12. SAFE MAINTENANCE. Disconnect air

supply and discharge the air tank and all
lines before doing maintenance.

13. SAFE SANDBLASTING. Always secure

the workpiece before sandblasting.

1. CORRECT ABRASIVES. Never use wet

abrasives in this sandblaster, it is designed
for dry abrasives only.

2. PROTECTING LUNGS. Make sure that you

always use an OSHA approved respirator
when using or cleaning the sandblaster.

3. LEAVING THE AREA. Always disconnect

air supply when leaving the sandblaster.

4. PROTECTING EYES. Make sure that you

always use the dust hood when using or
cleaning the sandblaster.

5. PROTECTING ENVIRONMENT. Always

sandblast in an area where the spread of
abrasive dust can be contained.

6. WORK AREA SAFETY. Clean compressor

and equipment air filters often, and repair
any air hose leaks immediately.

7. MAINTAINING COMPONENTS. Replace

nozzles, hoses, lenses, and safety gear
when they become worn.

No list of safety guidelines can be complete.

Every shop environment is different. Always

consider safety first, as it applies to your

individual working conditions. Use this and

other equipment with caution and respect.

Failure to do so could result in serious per-

sonal injury, damage to equipment, or poor

work results.

There is potential danger when operating

this equipment. Accidents are frequently

caused by lack of familiarity or failure to pay

attention. Use this equipment with respect

and caution to lessen the possibility of

operator injury. If normal safety precautions

are overlooked or ignored, serious personal

injury may occur.

Advertising
This manual is related to the following products: