Grizzly G2790 User Manual
Page 12
Advertising
G2790 Universal Knife Grinder
-9-
3.
Place the two tool clamps on the top of the
pivot plate as shown in
Figure 3.
Attach
using the tool clamp knobs and washers on
top and the special lock nuts underneath
the pivot plate.
4.
Position the clamps so they are centered
over the wheel, and adjust the width to the
approximate size of the workpiece you are
sharpening. See Section 5: Operations,
Narrow Knives for further information on
the grinding process.
Grinding Wheel
ON/OFF
Switch
Table
Slider
Assembly
Wheel Height
Lock
Pivot Plate
Adjuster
Grinder Height
Handwheel
Work Plate
Adjuster
Work
Plate
Pivot Plate
Adjuster
Fence
Knife Blade
Adjuster
Knife Blade
Clamp
Figure 4.
Universal Knife Grinder controls.
NOTES
Advertising