Grizzly G2790 - Manual (Page 9)

-6- G2790 Universal Knife Grinder
Unpacking
This Universal Knife Grinder is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you’ve
signed for delivery, and the truck and driver are
gone, you will need to file a freight claim with the
carrier. Save the containers and all packing mate-
rials for possible inspection by the carrier or its
agent. Without the packing materials, filing a
freight claim can be difficult.
If you need assis-
tance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
Parts Inventory
After all the parts have been removed from the
carton, you should have:
• Table Assembly
• Knife Support Assembly
• Work Plate Assembly
• Pivot Plate Assembly
•
Hardware
-Hex Head Jam Nuts 1 ⁄
4
" - 20 5
-Washers 1 ⁄
4
" 5
-Hex Head Bolts 5 /
16
" - 18 x 1 /
2
" 3
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify missing parts,
please refer to the detailed illustrations at
the end of the manual.