GE CGS980 - Manual (Page 36)

36
Care and cleaning of the range.
Operating Instructions
Safety Instructions
Installation Instructions
Tr
oubleshooting T
ips
Consumer Support
Stainless Steel Surfaces (on some models)
Do not use a steel wool pad; it will scratch
the surface.
IMPORTANT: APPLY A PROTECTIVE COAT
OF CERAMA BRYTE
® STAINLESS STEEL
BRIGHTENER BEFORE USING. This will help
you to maintain the brightness and
appearance of your stainless steel range.
■
In order to avoid any discolorations
and/or grease stains, we recommend
cleaning and removing any spills, spots
and grease from the range after use.
■
It is important to use a soft cloth or paper
towel every time the range is cleaned to
avoid any scratches.
Read carefully the instructions on the back
of the Brightener for better results.
Cleaning Instructions:
Remove grates.
Wash using warm, soapy water:
Wet soft cloth or paper towel (avoid
using excessive water).
Wipe the surface in the direction of the
grain (following the steel lines).
Rinse and wring out a soft cloth or paper
towel and dry the range.
Apply a degreaser that does not
contain sodium hydroxide or Stainless
Steel Cleaner (follow instructions).
Apply Cerama Bryte ® Stainless Steel
Brightener (follow instructions).
Repeat steps 2–4 as many times
as needed.
Put grates back in place.
Follow these instructions for any Stainless
Steel surface on your range.
DO NOT USE for Cooktop or Stainless Steel
parts cleaning:
• Caustic Lye (Sodium Hydroxide) or
cleaners containing this chemical
• Hard or Steel Wool Pads
• Abrasive Materials or Chemicals
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
National Parts Center
800.626.2002 (U.S.)
888.261.3055 (Canada)
ge.com (U.S.)
www.GEAppliances.ca (Canada)