Grizzly H8215 - Manual (Page 5)

Model H8215 6" Dual Action Air Sander -3 -
INTRODUCTION
A. Dual Action Air Sander
B. Oil Bottle
C.
1 /
4
" NPT Male Quick Connect Fitting
D. 6" Sanding Disc
Sanding Pad............................................6"
No Load Speed.......................10,000 RPM
Air Consumption...............................4 CFM
Air Inlet..................................................... 1 ⁄
4
"
Required PSI.....................................90 PSI
Maximum Sound Level......................84 dB
Sandpaper Type....................................PSA
Specifications
Figure 1. Model H8215 Inventory.
A
B
C
D
Foreword
The specifications, details, and
photographs in this manual represent
the Model H8215 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Inventory