Grizzly G0657/G0658 - Manual (Page 14)

-12-
G0657/G0658 Benchtop Lathe
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Setup Safety
SECTION 3: SETUP
The Model G0657/G0658
is a heavy machine. DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.
The Model G0657/G0658 was carefully packed
when it left our warehouse. If you discover the
machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
Inventory
Box Contents: (Figure 3) Qty
A. Benchtop Lathe (Not Shown) ..................... 1
B. Knockout Bar .............................................. 1
C. Safety Glasses ........................................... 1
D. Spur Center MT#2 ...................................... 1
E. Live Center MT#2 ....................................... 1
F. Hex Wrenches 3, 5, 6mm .................1 Each
Figure 3. Box contents.
B
D E
C
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them, or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 4. Additional contents (G0658 only).
G
H
I
Additional Contents (G0658 only): Qty
G. Flat Washers 3 ⁄
8
" ......................................... 3
H. Lock Handles .............................................. 3
I. Outboard Turning Attachment .................... 1
F