GE DEH-210 - Manual (Page 185)

PMCS Interface Toolkit Features of Tabular Data Screen Wizards
•
179
SR469 Motor Management Relay
All six function buttons under the Info box are enabled for the SR469.
The SR469 Tabular Data Screen wizard has nine command buttons, described below.
Tab Button Function
Metering Reset Device Issues a RESET command to the SR469
Clear MWh and Mvarh Clears these values from the SR469’s memory
Clear Peak Demand Clears this data from memory
Status Motor Start/Motor Stop Issues Motor Start or Motor Stop commands
Clear RTD Maximums Resets the RTD Maximums data
Trip Clear Last Trip Data Clears this data from memory
I/O Clear Analog Input
Min/Max Data Clears this data from memory
Maintenance Preset Digital Counter Allows presetting of digital counters.
Clear Trip Counters Clears the trip count data from memory.
Table 33. SR469 Tabular data screen commands.
See the SR469 Motor Management Relay manual (Chapter 5, Actual Values) for
information on the display of data values under different device configurations.
Values not configured for use are displayed as N/A.