GE DS-82 User Manual
Page 122
Chapter 4: Web-Based Management
118
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
OBJECT DESCRIPTION
DEFAULT
VALUE
Src IP Address
Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
• Any: Any IP address.
• IP : A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0-9,
*** is range from 0 to 255
Notice: This is not subnet mask.
Any
Dst IP Address
Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
Any: Any IP address.
IP : A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0-9,
*** is range from 0 to 255
Any
IP Fragment
Set this field if Packet Type is IPv4, else ignore.
Uncheck / Check
Uncheck: Not check IP fragment field.
Check: Check IP fragment field.
Uncheck
L4 Protocol
Set this field if Packet Type is IPv4, else ignore.
Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17)
Any
Protocol
Set this field if Packet Type is IPv4, else ignore.
0-255.
If protocol not find in L4 Protocol field, you can direct assign
number.
TCP
Set this field if Packet Type is IPv4, else ignore.
Any / FTP(21) / HTTP(80)
Any
Port
Set this field if Packet Type is IPv4, else ignore.
0-65535
If TCP port not find in TCP field, you can direct assign
number.
UDP
Set this field if Packet Type is IPv4, else ignore.
Any / DHCP(67) / TFTP(69) / NetBios(137)
Any