GE DS-82 - Manual (Page 35)

Chapter 3: Switch Management
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 31
Figure 16: New Connection dialog window
4. Change the Connect using drop-down menu to TCP/IP (Winsock) then input Host
address. The Managed Switches default IP address is 192.168.0.100 and the
default telnet port number is 23, then press the OK button.
Figure 17: The Connect to dialog window
Log on to the Console
Make sure the device finished booting. Once the telnet has connected to the device,
the hyper terminal will display the login request.
Then, the following message asks the login user name and password. The factory
default password as following and the login screen as following appear.
User name: admin
Password: admin