GE DS-82 - Manual (Page 8)

Chapter 1: Introduction
4 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Power over Ethernet of GE-DS-82-PoE
The PoE in-line power following the standard IEEE 802.3af makes the GE-DS-82-PoE
able to power 8 PoE devices at a distance of up to 100 meters through the 4-pair Cat
5/5e UTP wire.
How to Use this Manua
l
This User Manual is structured as follows:
Section Section Content
INTRODUCTION Product description with features and specifications
INSTALLATION
Explains the functions of the Managed Switch, and how to physically
install it
SWITCH MANAGEMENT
Contains information about the software operation of the Managed
Switch
WEB-BASED MANAGEMENT Explains how to manage the Managed Switch by Web interface
CONSOLE MANAGEMENT Describes how to use the Console Management Interface
COMMAND LINE
INTERFACE Explains how to manage the Managed Switch by Command Line
Interface
SWITCH OPERATION Explains how to operate the Managed Switch
POWER OVER ETHERNET
OVERVIEW Introduces the IEEE 802.3af PoE standard and PoE provision of the
Managed Switch.
TROUBLESHOOTING Explains how to troubleshoot the Managed Switch
APPENDIX A Contains cable information for the Managed Switch
Product Features
Physical Port
GE-DS-82
• 8-Port 10/100Base-TX RJ-45 interfaces
• 2 10/100/1000T TP combo interfaces
• 2 mini-GBIC/SFP slots, shared with Port-9 and Port-10
• Reset button for system management
• 1 RS-232 male DB9 console interface for basic Switch management and setup