Grizzly H7790 - Manual (Page 11)

Model H7790/H7791 Laminate Trim Router -9 -
SECTION 2: OPERATIONS
Removing/Installing
Router Bit
This router is supplied with a 1 ⁄
4
" collet for
use with 1 ⁄
4
" shank router bits. It will accept
router bits up to a 1 1 ⁄
8
" diameter. Carefully
inspect router bits for cracks, chips, or
other damage before installing. DO NOT
use router bits that have been dropped,
cracked, or damaged. The router bit may
shatter causing serious injury.
To remove or install a router bit:
1. UNPLUG THE ROUTER AND MAKE
SURE THE SWITCH IS OFF!
2. Loosen the lock knob and adjust the
base for access to the collet.
3. Place the collet wrenches as shown
in Figure 3, loosen the collet, and
remove the router bit.
CAUTION: The router bit is sharp and
will be hot after use. Wear gloves to
prevent injury when removing bit.
Figure 3. Loosening the collet.
4. Slide the router bit to within 1 ⁄
8
" of
the bottom of the collet and securely
tighten the collet with the wrenches.
Note: The collet can be damaged if it is
tightened without a bit.
Unpacking/Inventory
Figure 2. Model H7790/H7791 inventory.
B
The Model H7790/H7791 was carefully
packed when it left our warehouse. If you
discover the tool is damaged after you
have signed for delivery, please immedi-
ately call Customer Service at (570) 546-
9663 for advice.
Save the box and all packing materials for
possible inspection by the carrier or its
agent. Otherwise, filing a freight claim can
be difficult.
When you are completely satisfied with
the condition of your shipment, you should
inventory the contents.
Model H7790/H7791 Inventory (Figure 2)
A. Router with Base Plate (Not Shown) . 1
B. Collet Wrenches ................................. 1
C. Template Guide ................................. 1
D. Straight Trim Guide ............................ 1
E. Curved Trim Guide ............................ 1
In the event that any nonproprietary parts
are missing (e.g. a nut or a washer), we
would be glad to replace them, or for the
sake of expediency, replacements can be
obtained at your local hardware store.
C
D
E