Grizzly H7790 - Manual (Page 4)

Model H7790/H7791 Laminate Trim Router -2 -
INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H7790/H7791 Laminate Trim Router.
These models are part of a growing Grizzly
family of fine power tools. When used
according to the guidelines set forth in
this manual, you can expect years of
trouble-free, enjoyable operation and proof
of Grizzly’s commitment to customer sat-
isfaction.
It is our pleasure to provide this manual
with the Model H7790/H7791 Laminate
Trim Router. It was written to encour-
age safety considerations and guide you
through general operating procedures and
maintenance.
The specifications, details, and pho-
tographs in this manual represent the
Model H7790/H7791 as supplied when the
manual was prepared. However, owing
to Grizzly’s policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly.
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.
Foreword Contact Information