Goldmund Reference II Turntable - Manual (Page 20)

The Goldmund Reference II – Assembly manual 20
5 USER INSTRUCTIONS
Now your turntable is assembled, you can start using it:
1- Switch on the power supply
2- Unscrew the clamp and remove it very carefully.
3- Position the record to play
4- Re-mount the clamp carefully; tighten it holding its basis.
5- Select the speed corresponding to the disc:
• For 33T: press the button “33”
• For 45T: press the button “45”
• For 78T: optional (Please contact your local Goldmund distributor).
6- Position the tone arm on the record
7- To stop the turntable, press the button “STOP” after removing the tone arm.
We recommend leaving the turntable run for a few hours in order to stabilize its
performance.
Note: the bottom line of keys is dedicated to the Goldmund T8 tone arm use. (see the
separate user manual).