Grizzly T23092 - Manual (Page 4)

Model t23092 high-pressure spray gun -3 -
section 2: introduction
the specifications, details, and photographs
in this manual represent the Model h8222
as supplied when the manual was prepared.
however, owing to grizzly’s policy of
continuous improvement, changes may be
made at any time with no obligation on the
part of grizzly.
if you have any comments regarding this
manual, please write to us at the following
address:
grizzly industrial, inc.
C/o technical documentation
p.o. Box 2069
Bellingham, WA 98227-2069
email: [email protected]
Most importantly, we stand behind our
tools. if you have any service questions or
parts requests, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 Lycoming Mall Circle
Muncy, pA 17756
phone: (570) 546-9663
Fax: (800) 438-5901
e-Mail: [email protected]
Web site: http://www.grizzly.com
foreword specifications
this spray gun presents serious
injury hazards to untrained users.
read through this entire manual to
become familiar with the controls
and operations before using the
equipment!
type of Feed ...................................siphon
Viscosity range .................Medium to high
Waterborne Material Compatible ........... no
nozzle size .....................................2.0mm
Maximum pattern Width ..........................9"
Air inlet size .................................1⁄4" npt
Fluid Cup Capacity ...........................1 Liter
Average Air Consumption ........ 6–8.8 CFM
operating Air pressure .............. 44–58 psi
Cup Construction ........................Aluminum
gun Body Construction ........painted Metal
Country of origin .............................. China