Grizzly 38" LAWN SWEEPER T10043 - Manual (Page 5)

-5-
T10043 38" Lawn Sweeper
9. Place the assembled lower leaf bag frame
into the leaf bag and connect it to the upper
frame tubes with the M10 x 15 clevis pins
and two 3mm hairpin cotter pins, as shown in
Figure 13. Repeat for both sides.
Figure 13. Upper and lower frame connection.
Lower Leaf Bag Frame
Leaf Bag
Upper Frame Tube
Clevis Pin
Hairpin Cotter Pin
10. Connect the snaps, as shown in Figure 14,
then slide the bag frame bar into the pocket
in the leaf bag and secure it with two M6 x 33
clevis pins and two 2mm hairpin cotter pins.
12. Feel along the length of the upper bag tube
for the hole in the area indicated by the
Figure 16 inset. Puncture the leaf bag using
an awl or similar device, as shown. Attach
the bag mounting tube to the upper bag tube
with an M8 x 50 clevis pin, and secure it with
a 3mm hairpin cotter pin. Place a rubber cap
over the end of the bag mounting tube, as
shown in
Figure 16. Repeat for both sides.
Figure 16. Bag mounting tube.
Upper Bag Tube
Bag Mounting Tube
Clevis Pin
Rubber Cap
Hairpin
Cotter Pin
11. Insert the two support rods between the
upper and lower bag frame assemblies, as
shown in
Figure 15.
Figure 15. Support rods.
Figure 14. Bag frame bar.
Snaps
Pocket Bag Frame Bar
Clevis Pin
Hairpin Cotter Pin
Frame Assemblies
Support Rods