Grizzly H3098 - Manual (Page 13)

H3098 Western Guitar Kit -11-
In preparation for the finish coating, the fol-
lowing parts of the guitar (Figures 10 & 11)
need to be covered:
• Bridge Location
• Fingerboard
• Sound Hole (Hole Filled With Newspaper)
Use a small stick of wood to carefully press all the
masking tape edges securely to the guitar pieces.
The finish coat can seep under these edges,
especially near corners, uneven edges, and
where the frets meet the fingerboard. Note—
Failure to correctly mask off these areas could
result in unrepairable damage to the guitar.
Covered Areas
Figure 10. Masked bridge area and
blocked sound hole.
Figure 11. Masked fingerboard.