Grizzly H3098 - Manual (Page 16)

-14- H3098 Western Guitar Kit
The correct position of the guitar strings is shown
in
Figure 13 . The thin High E string is called the
"1st" string and the thick Low E string is called the
"6th" string.
To install the guitar strings:
1. Using a 3 ⁄
16
" drill bit, drill out the six string
mounting holes in the bridge.
2. Insert the ball end of the string into the cor-
responding bridge hole.
(Continued)
Winding Strings
6
5
4
3
2
1 E
A
D
G
B
E
Figure 13. Correct guitar string position.
To attach the pick guard to the body:
1. Peel the white paper from the pick guard to
reveal the adhesive backing.
2. Place the pick guard on the body so the
semi-circle aligns with the center ring of the
sound hole decal.
3. Peel the clear protective covering from the
face of the pick guard.
Pick Guard