Gefen EXT-HDMI1.3-CAT6-4X - Manual (Page 22)

18
DIP SWITCH CONFIGURATION
NOTE:
By default, all DIP
switches are set to the OFF
position.
Default settings for DIP switches
DIP Switch Position
1 OFF
2 OFF
3 OFF
4 OFF
DIP Switch Location
(Matrix Mode / Stand-alone Mode)
On the bottom of each Receiver unit, there are four (4) DIP switches. Each DIP
switch performs a different function.
Before modifying DIP switch settings, disconnect the power from the Receiver
unit. After the DIP switches have been confi gured, reconnect the power.
DIP Switch
Bank
Receiver Unit (bottom)