GE 49-90405 - Manual (Page 14)

14
before you call for service…
Problem Possible Causes What To Do
Small amount of water Inadequate load size for steam • If using the STEAM DEWRInklE cycle, manually reduce
on floor in front of dryer cycle selected, excess steam time. If using the STEAM REfRESh cycle, add more
condenses inside cabinet and garmentsto the load.
leaks out
Water on floor in back Loose water hose connection to • Tighten connection.
of dryer valve
Hose missing rubber washer at
• Install rubber washer provided with hose.
connection with valve
Water drips from door Steam condenses on inner door • This is normal.
when opened after
a Steam Cycle
Cannot see steam at
Steam released at different • This is normal.
beginning of cycle time in cycle
Cannot see steam at any The steam nozzle might be • Call 800.GE.CARES to order nozzle replacement kit
time during the cycle clogged with debris from your WE25M71 or to request a service technician to replace this
water supply for you.
Garments still wrinkled Too many garments • Load fewer garments; manually increase time.
after steam cycle
Dryer continues to
Extended Tumble was selected • Ensure EXTEnDED TuMblE option is not selected. For the
tumble after display STEAMREfRESh cycle, EXTEnDED TuMblE will
says Complete automatically be turned on and cannot be turned off.
Garment are wet after lint filter not clean • Clean lint filter
load is children or infant garments • Use the next smaller Steam cycle or use Steam Refresh
cycle.