Safety instructions, Warning, What to do if you smell gas – GE 49-90405 User Manual

Page 2: Proper installation

Advertising
background image

IMPORTAnT SAfETy InfORMATIOn.

READ All InSTRuCTIOnS bEfORE uSInG.

California Safe Drinking Water and Toxic Enforcement Act

This act requires the governor of California to publish a list of substances known to the state to cause cancer,

birth defects or other reproductive harm and requires businesses to warn customers of potential exposure to

such substances.
Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide,

formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LP fuels.
Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be minimized

further by properly venting the dryer to the outdoors.

WARnInG!

for your safety, the information in this manual must be followed to minimize the

risk of fire or explosion, electric shock, or to prevent property damage, personal

injury, or death.

WhAT TO DO If yOu SMEll GAS:

Do not try to light a match, or cigarette,

or turn on any gas or electrical

appliance.

Do not touch any electrical switch; do

not use any phone in your building.

Clear the room, building or area of

all occupants.

Immediately call your gas supplier from

a neighbor’s phone. follow the gas

supplier’s instructions carefully.

If you cannot reach your gas supplier,

call the fire department.

5

4

3

2

1

n

Do not store or use gasoline or other

flammable vapors and liquids in the

vicinity of this or any other appliance.

n

Installation and service must be

performed by a qualified installer,

service agency or the gas supplier.

n

Properly ground dryer to conform with all

governing codes and ordinances. Follow details

in Installation Instructions.

n

Install or store where it will not be exposed to

temperatures below freezing or exposed to

the weather.

n

Connect to a properly rated, protected and sized

power supply circuit to avoid electrical overload.

n

Remove all sharp packing items and dispose of

all shipping materials properly.

Exhaust/Ducting:

All dryers MuST be exhausted to the outside.
Use only rigid metal 4″ diameter ductwork inside

the dryer cabinet and use only rigid metal 4″

diameter or UL approved transition ducting

between the dryer and the home duct. uSE Of

PlASTIC OR OThER COMbuSTIblE DuCTWORk

CAn CAuSE A fIRE. PunCTuRED DuCTWORk

CAn CAuSE A fIRE If IT COllAPSES OR

bECOMES OThERWISE RESTRICTED In uSE OR

DuRInG InSTAllATIOn.
For complete details, follow the Installation

Instructions.

2

1

PROPER INSTALLATION

This dryer must be properly installed and located in accordance with the Installation Instructions

before it is used. If you did not receive an Installation Instructions sheet, you can receive one by

visiting GEAppliances.com or by calling 800.GE.CARES (800.432.2737).

2

Advertising
This manual is related to the following products: