Reversing the door, About reversing the door – GE 49-90405 User Manual

Page 9

Advertising
background image

9

Reversing the Door

Tools needed:
n

Standard #2

n

Tape-tipped

Phillips screwdriver

putty knife

Open the door and remove the filler plugs opposite the hinges. With the door

completely open, remove the bottom screw from each hinge on the dryer face.

Insert these screws about half way into the TOP holes, for each hinge, on the

opposite side (where you removed the filler plugs). Apply firm pressure to get

the screw started in new holes.

Loosen top screw from each hinge on the dryer face half way. With one hand

holding the top of the door and the other hand holding the bottom, remove

the door from the dryer by lifting it uP and OuT.

Rotate the door 180°. Insert it on the opposite side of the opening by moving

the door In and DOWn until the top hinge and the bottom hinge are resting

on the top screws inserted in step 1.

Remove the remaining screws from the side of the opening from which the door

was removed. With these screws, secure each hinge at the bottom. Tighten the

two top screws of each hinge. Reinsert the plastic plugs on the side from which

the door was removed.

4

3

2

1

About reversing the door.

GEAppliances.com

Advertising
This manual is related to the following products: