Turning on and off – GE A1250 User Manual
Page 21
Advertising
16
17
16
17
To remove the SD/SDHC card, open the battery com-
partment and gently push the card to release it. Pull
the card carefully.
Turning on and off
Press the
Power button to turn the camera on. To turn
off the camera, press the
Power button again.
When turned on, the camera will enter the mode ac-
cording to the mode dial setting. You can also turn the
mode dial to change the modes after the camera is
turned on.
3. Close the battery compartment.
Power Button
Advertising