GE A1250 User Manual
Page 47
Advertising
42
43
43
The stabilizer function is used for less blur picture
caused by hand shake under a dark environment, the
camera would increase the ISO level under the mode to
have a higher shutter speed.
This function may not help to take a clear picture
of a fast moving target, such as a car passing by,
etc.
This function may not help to stabilize photos if
you are in a moving vehicle (car, boat, etc.). It is
best used when taking normal shots.
Increasing the ISO level may cause heavier noise
on the photo.
Use of a tripod is always best to get the clearest
picture.
Advertising