Grizzly H8233 - Manual (Page 12)

Model H8233 3-Piece Framing/Brad Nailer & Stapler Kit -10 -
3. Insert a strip of staples into the maga-
zine, as shown in Figure 8, and slide
the magazine pusher all the way for-
ward.
4. Release the magazine latch lever to
lock the magazine pusher in place.
Figure 8. Loading staples.
3. Insert a strip of nails, pointed-end
down, into the magazine as shown in
Figure 6.
Figure 6. Loading nails into brad
magazine.
4. Slide the nails all the way to the nose of
the nailer.
5. Push the magazine cover forward until
the magazine latch locks it in place.
Stapler
Staple Size ................................. 21 Gauge
Staple Length ...................................
1 ⁄
4
"– 5 ⁄
8
"
Magazine Capacity .................. 120 Staples
To load your stapler:
1. DISCONNECT STAPLER FROM THE
AIR SUPPLY!
2. Depress the magazine latch lever and
slide the magazine pusher back (see
Figure 7).
Figure 7. Opening stapler magazine.
Latch Lever
Pusher