Grace Digital MINI-BULLETS II GDI-AQBLT300 - Manual (Page 6)

When the button is pressed, frequency tuning starts automatically and it stops
when a signal is detected. The POWER LED will illuminate steadily once
connected.
Î Keep a distance of the speaker up to 7 meters apart from
transmitter, and then press “SCAN” AUTO TUNE button for best
able to place the speakers freely from room to room
without disruption. Should you experience a “frequency jam”, adjust the
OTE: The signal fr
5. Adjust d up by
pressing “+” button or down by pressing the button “-“ to the desired listening
IF disruption should occur (signal breaks up), press the “SCAN”
auto-tuning button on the speaker to maximize best reception.
IF yo nels on
the transmitter and press the “SCAN” auto-tuning button for best reception.
NOT
storage periods. Move speakers indoors when weather conditions are extreme.
be used in conservative outdoor
conditions
should not be operated in extreme temperature
of water body
or in a moist or wet environment.
with your unit is intended for indoor
nvironments and use. Do NOT
tuning reception.
Î You should now be
channels by switch from one channel to the other channel on the transmitter,
and then press the “SCAN” AUTO TUNE button on the speaker again.
om the transmitter will decrease in strength over N
increased distances and as barriers and interference increase.
the volume to the desired listening level. Volume can be adjuste
level
OTE: N
u hear interference from other devices, switch between the chan
E: batteries should be removed from the transmitter & speakers for extended
6. Outdoor, Water Use & Weather Conditions
Î Mini-Bullets II speaker is designed to
Î The speaker
Î The transmitter and adapters must NOT be used in any type
WARNING: The power adaptor included
e
use the power adapter in moist or wet
TROUBLE SHOOTING
environments. Where there is a chance of rain, you may operate the speaker with
battery power.
t the batteries are fully charges on the speaker
Check there is not too much water retention inside the speaker grill. Turn
aker grill.
r
NO SOUND
- Check tha
-
over the speaker and let the water drain out from the spe
- Ensure the AC/DC adaptor is fully inserted into the AC outlet and the powe
connection input on the transmitter.
P.5