Grizzly G1067Z - Manual (Page 3)

-2- G1067Z Wood Lathe
Grizzly Industrial, Inc. is proud to offer the Model
G1067Z Wood Lathe. This lathe is a part of
Grizzly’s growing family of fine woodworking
machinery. When used according to the guide-
lines stated in this manual, you can expect years
of trouble-free, enjoyable operation.
The Model G1067Z is intended for home and
medium-duty professional use. This lathe fea-
tures a 1,725 R.P.M., 1 H.P. capacitor-start
motor, mechanical ON/OFF switch and rotating
head for spindle turning and bowl turning.
All running parts utilize shielded ball bearings,
which require no lubrication for the life of the
bearings.
We are also pleased to provide this manual with
the Model G1067Z. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our latest effort to produce the best docu-
mentation possible. If you have any criticisms that
you feel we should pay attention to in our next
printing, please write to us at the Bellingham, WA
address at the end of this section.
SECTION 1: INTRODUCTION
Most importantly, we stand behind our machines.
We have excellent regional service departments
at your disposal should the need arise. If you
have any service questions or parts requests,
please call or write to us at the location listed
below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
To comment on this manual write to:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
To operate this or any power tool safely and effi-
ciently, it is essential to become as familiar with it
as possible. The time you invest before you begin
to use your Model G1067Z will be time well spent.
DO NOT operate this machine until you are
completely familiar with the contents of
this manual. Serious personal injury may
occur.