Grizzly H8230 - Manual (Page 5)

H8230/H8231 15° Roofing Nailer -3 -
INTRODUCTION
The specifications, details, and pho-
tographs in this manual represent the
Model H8230/H8231 as supplied when
the manual was prepared. However, owing
to Grizzly’s policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly.
If you have any comments regarding this
manual, please contact us:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Foreword Machine Data
Model H8230
Nail Type ..................Flat Wire Welded Coil
Nail Angle .............................................. 15º
Nail Length .....................................
3 ⁄
4
"–1 3 ⁄
4
"
Nail Diameter ........................0.091"–0.120"
Magazine Capacity ...................... 120 Nails
Air Inlet ...........................................¼" NPT
Weight ...........................................6.05 lbs.
Operating Pressure ................. 70–110 PSI
Maximum Permissible Pressure .... 120 PSI
Model H8231
Nail Type ..................Flat Wire Welded Coil
Nail Angle .............................................. 15º
Nail Length ...................................1
3 ⁄
4
"–2 3 ⁄
4
"
Nail Diameter ........................0.091"–0.120"
Magazine Capacity .............. 225–300 Nails
Air Inlet ...........................................¼" NPT
Weight .............................................7.7 lbs.
Operating Pressure ................. 70–110 PSI
Maximum Permissible Pressure .... 120 PSI