GE 164D3333P171 - Manual (Page 17)

Oven Control Settings
+ and – Pads
These pads allow you to set times up to 9 hours and 59
minutes. Short taps to these pads change the time or
temperature by small amounts. Press and hold the pad to
change the time or temperature by larger amounts.
CLEAR/OFF Pad
Press this pad to cancel ALL oven operations except the clock
and timer.
SELF CLEAN Pad
Press this pad to select the self-cleaning function. See the
Using the self-cleaning oven
section.
NOTE: Do not lock the oven door with the latch during cooking. The latch is used
for self-cleaning only.
BAKE Pad
Press this pad to select the bake function.
BROIL HI/LO Pad
Press this pad to select the broil function.
Display
Shows the time of day, oven temperature, whether the oven is
in the bake, broil or self-cleaning mode and the times set for
the timer on automatic oven operations.
If “F–and a number” flash in the display and the oven control signals,
this indicates a function error code. If the function error code appears
during the self-cleaning function check the oven door latch—the latch handle
may have been moved, even if only slightly, from the latched position.
Make sure the handle is to the right as far as it will go. Press the
CLEAR/OFF pad. Allow the oven to cool for one hour. If the function error
code repeats, disconnect the power to the range and call for service.
Tr
oubleshooting T
ips
Installation Instructions
Customer Service
Operating Instructions
Safety Information
17