GE 164D3333P171 - Manual (Page 31)

Tr
oubleshooting T
ips
Installation Instructions
Customer Service
Operating Instructions
Safety Information
How to Delay the Start of Cleaning
Latch the door.
Press the SELF CLEAN pad.
Using the + or – pad, enter the desired clean time.
Press the START TIME pad. The earliest start time
you can set will appear in the display.
Using the + or – pad, enter the desired start time.
Press the START pad.
The self-clean cycle will automatically begin after CLEAN
is displayed and the time for the clean cycle is reached.
The words ON and LOCKED DOOR will appear in the
display. It will not be possible to open the oven door
until the temperature drops below the lock temperature
and the LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, slide the latch
handle to the left as far as it will go and open the door.
6
5
4
3
2
1
You may notice some white ash in the oven. Wipe it up with a damp
cloth after the oven cools.
If white spots remain, remove them with a soap-filled steel wool pad and rinse
thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by
the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
■ You cannot set the oven for cooking until the oven is cool
enough for the door to be unlatched.
■ While the oven is self-cleaning, you can press the CLOCK pad to
display the time of day. To return to the clean countdown, press
the SELF CLEAN pad.
■ If the shelves become hard to slide, wipe the shelf supports
with cooking oil.
After a Clean Cycle
31