Grizzly Wood Copy Attachment G2891 - Manual (Page 7)

G2891 Lathe Copy Attachment -5-
SeCtIon 2: IntroduCtIon
Grizzly Industrial, Inc. is proud to offer the
Model G2891 Wood Lathe Copy Attachment.
The G2891 is part of Grizzly’s growing family of
fine woodworking and metalworking machinery.
When used according to the guidelines stated in
this manual, you can expect years of trouble-free,
enjoyable operation.
The Model G2891 is a wood lathe duplicator
capable of mass-producing many shapes of the
same design. The G2891 comes complete with
mounting hardware and cutting tool.
We are also pleased to provide this manual with
the Model G2891. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our effort to produce the best documenta-
tion possible. If you have any comments regard-
ing this manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C /
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
machines. If you have any service questions
or parts requests, please call or write us at the
location listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 326-3806
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzlyindustrial.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G2891 as supplied when the manual was pre-
pared. however, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep
it for reference.
to operate this, or any power tool, safely
and efficiently, it is essential to become as
familiar with its characteristics as possible.
the time you invest before you begin to use
your model G2891 will be time well spent.
do not operate this machine until you
are completely familiar with the contents
of this manual. make sure you read and
understand all of the safety procedures. If
you do not understand something, do not
operate the machine.
Commentary