Grizzly Wood Copy Attachment G2891 - Manual (Page 8)

-6- G2891 Lathe Copy Attachment
unpacking
This Wood Lathe Copy Attachment is shipped
from the manufacturer in a carefully packed
carton. If you discover the machine is damaged
after you’ve signed for delivery, and the truck
and driver are gone, you will need to file a freight
claim with the carrier. Save the containers and all
packing materials for possible inspection by the
carrier or its agent. Without the packing materials,
filing a freight claim can be difficult. If you need
assistance determining whether you need to file
a freight claim, or with the procedure to file one,
please contact our Customer Service.
parts Inventory
After all the parts have been removed from the
carton, you should have:
• Main Attachment Body
• Large Handwheel
• Hardware Box
5 ⁄
8
"-11 x 2 1 ⁄
2
" Socket head Cap Screw 2
Threaded, Square Mounting Plate 2
Bed Brackets 2
handwheel handle 1
Cutting Tool 1
Unthreaded, Rectangular Mounting Plate 2
Allen ® Wrench 4mm 1
Allen ® Wrench 5mm 1
Allen ® Wrench 14mm 1
M8-1.25 x 60mm hex Bolt & Clamp Plate 2
M8-1.25 hex Nut 2
3 ⁄
8
" Flat Washer 2
3 ⁄
8
" Lock Washer 2
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
notICe
a full parts list and breakdown can be
found toward the end of this manual. for
easier assembly, or to identify missing
parts, please refer to the detailed illustra-
tions at the end of the manual.