GE 00008005 - Manual (Page 31)

31
• To connect to the waiting call, press the FLASH/DELETE button on the handset, and
your original call is put on hold.
• To switch between the two calls, press the FLASH/DELETE button.
TIP: Don’t use the TALK/CALL BACK or SPEAKER button on the
handset to activate custom calling service such as call waiting, or
you’ll hang up the phone.
Last Number Redial
You may redial a number up to 3 digits long. To quickly redial the last number you
dialed:
1. Press the TALK/CALL BACK or SPEAKER button.
. Press the REDIAL button.
-OR-
To quickly choose from any of the last three numbers you dialed:
1. Press the REDIAL button first, then use the 6 or 5 button to select the desired
redial number.
. Press the TALK/CALL BACK or SPEAKER button, the number dials automatically.
-OR-
If you get a busy signal and want to keep dialing the number, press the REDIAL button
to quickly redial the number.
Exit
Press the *EXIT button to exit a menu function and return to the standby screen.
Page
The page feature helps you locate a misplaced handset. To send and receive
pages, all handsets must be registered. If your handset is not registered, follow the
instructions in the Registration section of this manual.
Paging from the Base/Group Page
Use the base-only to page all registered handsets at the same time.
1. Make sure the phone is
OFF (not in talk mode).
. Press the PAGE button on the base.