Grizzly G0656 - Manual (Page 15)

G0656 8" Jointer with Built-In Mobile Base
-13-
Floor Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some residential floors may require additional
reinforcement to support both the machine and
operator.
Placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See
Figure 6 for the minimum
working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
The unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner or
citrus-based degreaser such as Grizzly’s G7895
Citrus Degreaser. To clean thoroughly, some parts
must be removed.
For optimum performance
from your machine, clean all moving parts or
sliding contact surfaces. Avoid chlorine-based
solvents, such as acetone or brake parts cleaner
that may damage painted surfaces. Always follow
the manufacturer’s instructions when using any
type of cleaning product.
To access the sliding surfaces, remove the lock
nut (
Figure 5) and flat washer securing the fence
lock handle, and remove the fence from the jointer
unit.
Site Considerations Clean Up
Figure 6. Minimum working clearances.
�� � �
�
�
���
����
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Figure 5. Removing the fence lock nut so the
sliding surfaces can be cleaned.
Once the sliding surfaces of the fence are clean,
reassemble the fence to the jointer and secure
the lock handle with the lock nut and washer.
Fence Lock
Handle
Fence Lock Nut