Grizzly 10" x 18" benchtop lathe H8259 - Manual (Page 12)

-10-
model h8259 mfg. 10/07+
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Set up Safety
SECTiON 3: SETuP
The Model H8259 is a
heavy machine. DO NOT
over-exert yourself while
unpacking or moving
your machine—get assis-
tance.
the model h8259 was carefully packed when it
left our warehouse. if you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
unpacking
inventory
after all the parts have been removed from the
box, you should have the following items:
Box Contents: (figure 3) Qty
A. 10" x 18" benchtop lathe (not shown) ..... 1
B. live Center mt#2 ....................................... 1
C. spur Center mt#2 ...................................... 1
D. Quill handwheel Crank .............................. 1
E. hex Wrenches 3, 6, 8mm .................1 each
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them, or
for the sake of expediency, replacements can be
obtained at your local hardware store.
figure 3. box contents.
b
d
e
C