Garmin GPSMAP 6212 User Manual

Page 50

Advertising
background image



GPSMAP

®

6000/7000 Series Owner’s Manual

Where To?

1. From the Home screen, select

Where to?

>

Waypoints

.

2. Select a waypoint.
3. Select

Navigate to

.

4. Complete an action:

Select

Go to

.

Select

Route to

.

Select

Guide to

to use Auto Guidance.

5. Review the course indicated by the magenta line.

Note: When using Auto Guidance, a gray line within any part of the magenta line indicates that

Auto Guidance cannot calculate part of the Auto Guidance line due to the minimum safe water

depth and the minimum safe obstacle height settings (

page 59

).

6. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least

one route (

page 37

).

1. From the Home screen, select

Where to?

>

Routes

.

2. Select a route.
3. Select

Navigate to

.

4. Complete an action:

Select

Forward

to navigate the route from the starting point used when the route was created.

Select

Backward

to navigate the route from the destination point used when the route was

created.

A magenta line appears. In the center of the magenta line is a thinner purple line that represents

the corrected course from your current location to the destination. The corrected course is

dynamic, and it moves with your boat when you are off course.

5. Review the course indicated by the magenta line.
6. Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and

other obstacles.
Note: If you are off course, follow the purple line (corrected course) to go to your destination,

or steer back to the magenta line (direct course).

Browsing for and Navigating Parallel to a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least

one route (

page 37

).

1. From the Home screen, select

Where to?

>

Routes

.

2. Select a route.
3. Select

Review

>

Navigate to

.

4. Select

offset

to navigate parallel to the route, offset from it by a specific distance.




Advertising
This manual is related to the following products: